Mold shelf production process.storage shelving units for home

　　The light mold shelf uses 100#groove steel as a dedicated column, and the columns are rolled out of one time by high -quality Q235 with steel.

　　The drawer plate frame is generally welded with rectangular tube and 4.0 bending parts to form the upper steel plate. The guide slot is bent with 4.0 steel plate. The top and bottom are connected by beams, the top plate is laid, and the top plate can be stored.

　　The heavy mold shelf uses a heavy shelter as the overall frame, and the guidance rail and drawer plate are installed on the shelves. Generally, the column needs to be not less than 90 × 70 columns.

　　The mold shelf is composed of a pillar with a pillar and a pillar. The guidance slot is installed on the pillar. The upper and lower beams are connected to the fixing, and then the drawer plate is installed in the guide slot.

　　If there is no hanging in the plant, you can also set up the rails and cars on the upper column of the shelf, and can install a manual or electric gourd.

　　After the overall components are done, they can remove oil and rust, and spray the last surface treatment process through the blasting balls. After completion, they can be packed and shipped.

Read recommendations:

4-Tier Wire Shelving Unit / Steel Organizer Wire Rack Chrome / Custom Steel Wire Racks / Heavy Duty

chrome sliding wire shelf custom

Introduction to the characteristics of supermarket shelves.wire storage racks for pantry