How to maintain it after the shelves are installed?wire storage rack kitchen sales

　　1. When installing the shelves, one or more iconic signs must be set in the eye -catching part of the shelf. The area of each sign should not be less than 20 square centimeters. The larger average load (KG) and the number of units that are allowed to be stored per grid.

　　2. The settlement value of the combined shelf shelf should be strictly controlled to ensure the normal use of the frame structure. The non -library shelves should pay attention to the separation of the shelves and the foundation of the building house pillar when installation, preventing the force of the frame structure and cause damage to the building.

　　3. The pillars of the shelf should be correctly fixed on the basis of concrete. It should be known that the connection method of the shelves and the ground is the embedded parts, the secondary pouring scheme, or the scheme that is directly connected to the ground with the ground. The diameter and smaller size buried in the bolt must be determined based on the actual load, earthquake load or wind load. Small shelves with handmade racks below 2.4m can not be fixed. The concrete of fixed shelf columns must be continuously solidified for 29 days, and the corresponding pressure must be affected. Unexplained sinking must meet the requirements of the use.

　　4. When installing a beam -type shelves, be careful that the two ends of each beam must be equipped with a locking device, or a place where screws and nuts are provided to make the beams stably fixed on the column to prevent being separated from the upper external force. To ensure the combination of the beam and its lock device, the normal operation of the beam lock should be checked regularly during use or the tightness of the screw nut, and the damaged device should be replaced in time.

　　5. There are strict installation procedures. When installing the frame structure in the state of durability or a larger load limit, the relevant standards must be met, and there must be calculation books. For major projects, it is necessary to compound the strength, stiffness and stability of the shelves, and comprehensively assess the safety of the earthquake. For reused standard shelves, there must be a general calculation book.

　　6. When installing the structure of the frame, you should comprehensively consider the requirements, equipment conditions, load properties, material supply and installation conditions, etc., and reasonably select structure forms, structural measures, and production materials to achieve advanced technology, reasonable economy, safe applicable, ensuring, guarantee quality.

Read recommendations:

4-Tier Metal Utility Rolling Cart / Mesh Wire Storage Trolley / Slide Out Storage Shelving Units for

expandable wire storage rack

Precautions for placing shelves in supermarkets.stainless steel table with wire shelf