Grinding tool shelf.white metal garage shelving

　　The lightweight mold shelf uses 100 # channel steel as a dedicated column, which is made of high-quality Q235 strip steel through one-time rolling by a rolling mill.

　　The drawer tray frame is generally welded with rectangular tubes and 4.0 bent parts to form a steel plate on top. The guide groove is made of 4.0 steel plate bent. The top and bottom are connected by crossbeams, and the top is covered with a top plate, which can store items.

　　The heavy-duty mold shelf adopts a heavy-duty shelf as the overall framework, with guide rails and drawer discs installed on the shelf columns. General columns require a minimum of 90 × 70 columns.

　　The mold shelf is composed of columns and pull rods to form column pieces. The guide groove is installed on top of the column pieces, and the upper and lower parts are connected and fixed with crossbeams. Then, the drawer disc is installed in the guide groove, and the limit pin and guide rail are installed. Finally, the top plate is laid.

　　If there is no overhead crane in the factory, overhead rails and cranes can be installed on the rack columns, and manual or electric hoists can be installed. The overhead rails should be no less than 100 × Weld the crossbeam at 50 degrees.

　　After completing the black embryo of the entire component, it undergoes shot blasting, oil removal, rust removal, and the final surface treatment process of plastic spraying. After completion, it can be packaged and shipped.

Read recommendations:

4-Tier Metal Wire Shelf for Warehouse / Metal Wire Shelving Unit

4-shelf wire storage rack Production

The basic characteristics of light shelf