Double -sided cantilever pavilion shelves.bathroom space saving organizer rack

　　1. The downstairs structure is a cantilever shelter+attic platform integrated structure

　　2. The floor height does not contain 2100mm, and the net air height is 2020mm

　　3. Each lane on the downstairs is equipped with a 4 -layer cantilever beam, including the ground with a total of 500mm in the bottom layer of 5 layers, and 295mm above the 4th floor

　　4. Each floor downstairs is equipped with 4 cantilever beams, and 4 carries each in each group of 500kg

　　5. The front end of the cantilever beam is equipped with detachable intubation, the intubation is 180mm higher than the beam surface

　　6, cantilever attic with 900mm width staircase 1 set

　　7. The floor floor to the wall, do not rely on the wall with a double -layer safety guardrail

　　8. The pillars downstairs are blue, the horizontal beam guardrail is orange, and the standard shelf is blue

　　9. The rear of the downstairs stairs is equipped with 2000*600*2000 (4 layers of 300kg/layer) 1 set of main frames

　　The rear of the downstairs stairs is equipped with 1500*600*2000 (200kg/layer 4 layer) 2 sets of auxiliary frames

　　10. Put 2.0 steel gussetting upstairs: against the wall, board to the wall

　　11. The upstairs plan is 600kg of a shelf, and each two racks plus 1 aisle is 4 square meters. It is expected that 1400kg is expected to be designed for 350kg per square meter.

　　12. Place standard carrier 2000*600*2000kg 300kg/layer 3 -layer beam layer number: 42 sets

Read recommendations:

5 Shelf Wire Storage Rack / Wire Chrome Shelving Unit / Wire Storage Rack 30 Wide / Steel Wire Rack

wire closet shelf

How to prolong the service life of attic shelves?