Detailed Introduction to Heavy duty Shelf Style Design

　　1. The length of the slope for the storage shelf design is moderate. The total depth design of the shelf (i.e. the length of the guide rail) should not be too large, otherwise, the "dead corners" above will not be available, which will affect space utilization. If the slope is too long, the controllability of the slider will be reduced, and the momentum of the slider will be greater. Easy to cause sliding, blocking, and tipping of palletized goods.

　　2. Reasonable slope. After installing the chute on the rack, it should be ensured that it has a certain inclination to allow the tray to slide under heavy loads.

　　3. Add damping device. In order to ensure the stability of the slide rail, if the slope is long and to prevent the pallet goods from tipping over due to excessive impact when sliding to the bottom, a buffer device and a part of the picking separation device slope should be installed at the lower part. Therefore, the design, manufacturing, and installation are more difficult and costly.

　　4. The shelf should not be too high. Regardless of the type of storage rack warehouse, reliability and operability are particularly important. The heavy-duty shelves of Shenzhen shelf manufacturers are usually within 6 meters, and the weight of a single pallet is usually within 1000KG. If the height is too high, then a single pallet is too high. Heavy, its reliability and operability will be greatly reduced.

Read recommendations:

Garage Chrome Wire Shelf Trolleys / Storage Microwave Rack Cart With Wood Top

white wire shelving unit Processing

Why is heavy storage shelves welcomed by the logistics industry?