4 tier wire shelving unit.The rules and requirements that must be followed in the production of warehouse shelves

　　The quality of warehouse shelves has a significant impact on the storage safety system. In today's rapidly developed world, people are concerned about modern logistics. The level of attention is also increasing, and the demand for shelves is also significantly increasing. The industry scope of shelf use is also constantly expanding, and the number of shelf providing enterprises is also constantly increasing, forming a fiercely competitive shelf market. However, due to the low admission standards for the shelf industry and the lack of standardized industry standards, the following aspects must be achieved to avoid affecting the safety of shelf use. The warehouse shelves must comply with the following rules to ensure the quality and safety of the shelves.

　　After assembling the warehouse shelves into column pieces, the accuracy should meet the following requirements: the maximum error in the height of the warehouse shelf pieces is ± 2mm, the maximum error in the width is ± 2mm, and the maximum error in the unevenness of the bottom plate is ± 0.5mm. After welding, the accuracy of the crossbeam of the warehouse shelf should meet the following requirements: for the three column claw connection of the column card and the verticality of the base line of the shelf crossbeam, the length range of the crossbeam should be less than or equal to 2mm, and the welding direction of the column card and crossbeam should maintain a maximum error of ± 1mm.

　　Request for the overall installation of warehouse shelves: The straightness of the length of the column section of the warehouse shelves in the direction of width should be within 6mm. The height error between the warehouse shelves and the same horizontal beam on the same floor is ± 1mm. The maximum error range between the bottom base of the column of the shelf section near the first floor is ± 2mm. The displacement range of the same aisle and the shelf section in a column should not exceed 5L.

Read recommendations:

MZG Steel Storage Shelving 5-Tier Wide, Black

4 tier steel wire shelf distributors

Classify according to shelf structure.Cabinet Shelf Organizer Storage Rack manufacturer