Precautions for the installation of attic shelves

　　1: Structural positioning: The positioning of the shelf in the attic is basic and needs to be carried out step by step. In the structural positioning, a blank space should be reserved according to the actual situation. Similar to the through shelf, first install the column, and then graft the beam. Or alternatively, one column and one beam are carried out alternately

　　2: Stairs: In order to facilitate the installation of attic shelves, installing attic stairs first can reduce the cost of installation time. It is recommended that movable stairs be installed first If the stairs are fixed by welding, they can only be installed after the attic shelves are installed. To avoid deviation of passage distance, the stairs cannot be installed normally

　　3: Layered shelves on the attic: The attic shelves will not be stored separately. Generally, in the storage environment, the upper layer of the attic shelves will be equipped with laminated shelves for use. The installation of the laminated shelves needs to wait until the attic planking is completed and the welding is completed before installation

　　4: Planking installation: the installation of planking is relatively easy. After installation, multi-point welding is required to ensure that the planking will not produce friction or movement sound after being squeezed. The installation personnel need to constantly debug the installation

　　5: Chemical bolt stabilization: After the column beam is installed, chemical bolts shall be used for drilling immediately. After the chemical bolts are drilled, it is necessary to wait about 10 minutes before installing the parts of the attic shelf

　　6: Installation of parts at the bottom of the attic: The installation of parts at the bottom of the attic is usually carried out after the completion of the overall structure of the attic, or it can be adjusted by itself

　　7: Lighting: The lighting is an indispensable equipment for the attic shelves, and the position of the lighting should be adjusted properly during the installation to avoid leaving a dead corner for lighting in the attic. The installation of the lighting should be completed after the installation of the attic shelves

Read recommendations:

2-Tier Cabinkitchen storage shelving unit manufactureet Shelf / Kitchen Counter Rack Organizer / Cou

wire kitchen/pantry shelving wholesale

How can storage shelves be used for a longer time.rubbermaid wire closet shelf